Title : Teledyne e2v Releases 4MP BSI Rad-Hard Sensor
link : Teledyne e2v Releases 4MP BSI Rad-Hard Sensor
Teledyne e2v Releases 4MP BSI Rad-Hard Sensor
Teledyne e2v has released a new image sensor, the CIS120, for harsh environments such as space applications. Samples have been available since February 2019 along with a full test and demonstration system.Key specifications of the CIS120 include a resolution of 2048 x 2048 and BSI 10µm square pixels with a QE of 90% at 550 nm (typical). The sensor offers both a rolling shutter mode with a frame rate of 30 fps (8 bit) and a global shutter mode with a frame rate of 20 fps (12 bit).
Key features include:
- Good latch-up immunity and high SEU threshold by design and is resistant to ionising radiation by process choice
- Pixel read timing is set by an on-chip sequencer to simplify use and to reduce pin count
- A column parallel ADC is controlled by its own sequencer
- Resolution can be set anywhere from 8 to 14 bits
- Four LVDS channels output the image data and are controlled by the readout sequencer to scan along each row in turn.
- All configuration settings are programmed over an SPI. This includes shutter mode, ADC resolution and bias current values
- Package options include ceramic PGA and metal and ceramic three-side butting designs for use in mosaic focal planes
- CIS120 is stitched, so other sizes are possible from 2048 × 1024, up to 2048 × 8192 pixels, without the cost of new masks as well as other customer-specific requirements such as anti-reflective coatings
- An increased charge capacity of 100 ke– is possible by a metal pattern change
Thus Article Teledyne e2v Releases 4MP BSI Rad-Hard Sensor
That's an article Teledyne e2v Releases 4MP BSI Rad-Hard Sensor This time, hopefully can give benefits to all of you. well, see you in posting other articles.
You are now reading the article Teledyne e2v Releases 4MP BSI Rad-Hard Sensor with the link address https://caronrepiyu.blogspot.com/2019/03/teledyne-e2v-releases-4mp-bsi-rad-hard.html
0 Response to "Teledyne e2v Releases 4MP BSI Rad-Hard Sensor"
Post a Comment